Table of Contents
Advertisement
.
If your VCR viewing
channel is 3 or 4, make sure the VCR
indicator
appears in the VCR's display panel. If not, press TV°VCR
to turn it on.
4.
Use the SPEED button
on the remote to select a recording
speed.
The tape speed indicator
appears on the TV screen.
5.
Select the chan_el or line input to be recorded.
6.
Set the Reception: STEREO/MONO/SAP feature for the type of
audio you want to record. See Other Features section.
AUDIO
1
Reception:
STEREO
2
Tape
Playback:
HI-FI
0
Exit
7.
Press RECORD to start recording.
8.
Press STOP when you are finished.
RECORDING
AUDIO
ONLY
You can record audio only from another audio source connected
to the
AUDIO IN I (R and LIMONO) jacks on the back of the VCR.
I.
Press the INPUT button
on the remote to select the line input.
The VCR will record audio from the audio equipment
connected
to the AUDIO IN I jacks.
2.
Use SPEEDon the remote to select the recording
speed.
3.
Start audio source playing and press RECORD to begin
recording.
4.
Press STOP when you are finished.
Playing
Back Audio
Only
To get stereo sound, connect the AUDIO OUT jacks of the VCR to
the appropriate
input on your amplifier
or receiver. Do not use
the phono input. Refer to your amplifier
or receiver user's guide.
I
Recording
audio
only will
erase
1
anything
that was previously
recorded
on the tape.
Audio
Connection
VCR
ANT
R-AU )IO-L
VIDEO
ou,_--_--
Q
W_,UH_
I
o_ _orv _'_
.-
_
J,:H 1
i[____
AMPLIFIER/REC:EIVER
PHONO
TUNER
TAPE
AUX
35
Advertisement
Table of Contents
