Table of Contents
Advertisement
.
If your VCR viewing
channel is 3 or 4, make sure the VCR
indicator
appears in the VCR's display panel. If not, press
TV°VCR to turn it on.
4.
Use the SPEEDbutton
on the remote to select a recording
speed. The tape speed indicator
appears on the TV screen.
5.
Select the channel or line input to be recorded.
6.
Set the Reception: STEREO/MONO/SAP feature for the type of
audio you want to record. See Other Features section.
AUDIO
I
Reception:
STEREO
2 Tape
Playback:
HI-FI
0
Exit
7.
Press RECORD to start recording.
8.
Press STOP when you are finished.
RECORDING
AUDIO
ONLY
You can record audio only from another
audio source connected
to the AUDIO IN (R and L) jacks on the back of the VCR.
1.
Press the INPUT button
on the remote to select the line input.
The VCR will record audio from the audio equipment
connected
to the AUDIO IN jacks.
2.
Use SPEEDon the remote to select the recording
speed.
3.
Start audio source playing and press RECORD to begin
recording.
4.
Press STOP on the remote (STOP°EJECT on VCR) when you are
finished.
Playing
Back Audio
Only
To get stereo sound, connect the AUDIO OUT jacks of the VCR to
the appropriate input on your amplifier or receiver. Do not use
the phono input. Refer to your amplifier or receiver user's guide.
Recording
Audio
1
Any video on the tape is erased when
you record audio only.
Audio Connection
OUT
IN
VCR
AMPLIFIER/ RECEIVER
o_
,0.
TAPE
AUX
29
Advertisement
Table of Contents
