Table of Contents
Advertisement
PAUSE Pauses playback or recording.
Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
RECORD Starts VCR recording.
Also used for Express recording.
REVERSE
Rewinds
the tape
when
the VCR is stopped.
Searches
backward
through
a tape during
playback.
Starts slow motion
during
play-pause
and decreases slow-motion
speed.
SEARCH Displays INDEX and GO-TO Search menus on TV screen
when VCR is stopped. Advances the tape 30 seconds of recorded
material during playback. Each press advances the tape an
additional 30 seconds up to five minutes.
SPEED Selects a recording
speed (SP or SLP).
STOP Stops the current VCR function
such as record, playback,
rewind, or fast forward. To eject a tape, press and hold the STOP
button for three seconds while in STOP mode.
TRACKING Up or Down
Lets you manually reduce the streaks
that may appear on the picture during play, slow motion, or
pause. Reduces picture "jitter"
during stop-action playback.
TV,VCR
Switches the picture signal so that it either comes from
the VCR or cable/antenna
system.
TV FUNCTION
Bu'n'ONS
CHAN Up or Down
Selects next higher or _ower channel in the
TV's channel memory.
CLEAR Removes menus or status displays from the screen.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. PressGO
BACK to switch between the two channets.
INFO Shows the TV's status displays on the TV screen.
INPUT Selects between the TV's input channel or tuner. Press to
see the VCR signal if you connected your VCR using the
AUDIO/VIDEO jacks.
MUTE Reduces volume to minimum
level.
Numbers
(0 through
9)
Select a channel
up to 99 by pressing
two numbers.
Select a cable channel
over 99 by pressing
and
holding
1 until
I - - appears on the screen. Then press the other
two numbers.
Continued on Next Page
TV Buttons
The TV buttons may not control all
features of all models of RCA, GE,
and ProScan TVs.
25
Advertisement
Table of Contents
