Table of Contents
Advertisement
TROU
B LESHOOTI
NG TI PS (CONT.)
WILL
NOT
RECORD
OR PLAY
Check to make sure there is a tape in the VCR.
Try ejecting
and reinserting
the cassette.
•
Check to make sure the tape is not broken.
•
Check to make sure the VCR is not in pause mode, Press PAUSE or
PLAY to return to normal playback.
Check the ProTect Plus
TM
feature.
REWIND
DOES NOT OPERATE
•
Check to make sure the tape is not already rewound.
VCR
PLUS
PROGRAMMING
SYSTEM
ORTIMER
RECORDING
NOT
MADE
OR WRONG
PROGRAM
RECORDED
Check to make sure the correct VCR Plus+ code is entered.
•
Check to make sure the cable box or satellite receiver was turned on
when recording
was to begin,
Check to make sure the program
was entered correctly
(wrong
channel or times).
Power interruption.
Reset the clock.
•
Check to see if time and date are correct - including
AM/PM.
•
Check to make sure the program
did not exceed the tape's length or
the tape was not rewound
beforehand.
•
Check to make sure the VCR was turned off at the time recording
was to start.
Check to make sure there was a tape in the VCR and the cassette's
safety tab was intact,
•
VCR ejects cassette when the end of the tape is reached during
a
timer recording.
•
Check to make sure VCR Plus+ setup was completed
correctly.
WILL
NOT
RECORD
Check to make sure the safety tab is intact.
•
Check to make sure the VCR is not in the line mode. Press LNPUT on
the remote.
CLOCK SHOWS INCORRECTTIME
OR DATE
•
Power interruption.
•
Check to make sure the clock is set accurately (check AM/PM and
date).
Check Daylight-Saving
setting. The clock may have adjusted
for
daylight-saving
time.
TIME
DID NOT ADJUST FOR DAYLIGHT-SAVING
TIME
•
Check to make sure daylight-saving feature is set correctly.
64
Advertisement
Table of Contents
