Table of Contents
Advertisement
STEP 1: WHAT'S
IN THE
BOX?
The following items come packed in the box:
•
VCR
•
Remote control
•
RF coaxial cable
•
AAA Batteries
STEP 2: INSTALL
BATrERIES
IN THE
REMOTE
CONTROL
Follow these steps whenever you need to install or change the
batteries
in your VCR remote.
1.
Remove the cover of the battery compartment.
2.
Place the batteries
into the remote's back panel. Match the
positive (+) and negative (-) ends of each battery to the
diagram
inside the battery compartment.
3.
Replace the cover.
STEP 3: CONNECT
YOUR VCR
If you connect your VCR to your home antenna or cable system
and then to your TV, use the VCR's ANT. IN and RF OUT jacks for
a good signal as shown to the right.
if you have a TV with AUDIO/VIDEO jacks, use the jacks for a
better connection.
Refer to the section, Connections,
toward
the back of the manual, for additional
connection
options.
STEP 4: PLUG IN THE VCR
Your VCR's power cord has a plastic band strung through
the
blades. Remove
plastic band before
plugging
the cord into
the power
outlet.
To remove band, cut with a pair of scissors
and pull it free of the blades. Once the plastic is removed, match
the wide blade of the power cord to the wide slot in the AC
outlet. Be sure to insert the plug completely.
VCR
TV
I
CABLE, CABLE BOX, OR ANTENNA_
I
I
4
Advertisement
Table of Contents
