SHROUD LOWER PANEL INSTALLTION[PANEL REPLACEMENT]
1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. After temporarily installing new parts, make sure the related parts fit properly.
Note
• When replacing the hood lock bracket and the condenser bracket separately, weld the 7 locations
indicated by (A) and the 6 locations indicated by (B).
2
End Of Sie
BM: BUMPER BRACKET
09-80B–6
BODY STRUCTURE [PANEL REPLACEMENT]
SHROUD LOWER PANEL
(B) 3
CONDENSER BRACKET
HOOD LOCK BRACKET
(A) 7
id098008603200
2
(B) 3
D5U0980B043