Side Mounting The Cisco Cva122/Cva122E Cable Voice Adapter - Cisco CVA122 Hardware Installation Manual

Chapter 3 Installing the Cisco CVA122/CVA122E Cable Voice Adapter

Side Mounting the Cisco CVA122/CVA122E Cable Voice Adapter

The Cisco CVA122/CVA122E Cable Voice Adapter can be placed on its side on a desktop or other
stable, flat surface, using the support stand that is shipped with the unit. To mount the cable voice
adapter on its side, use the following procedure:
Decide which side should be placed on the stand. The cable voice adapter can be mounted on either side,
Step 1
according to whichever position is most convenient for cabling.
Although the cable voice adapter can be mounted on either side, Cisco recommends that
Note
it be placed with its coaxial cable connector on the bottom. This provides the most stable
placement when the coaxial cable (and other cables) are connected to the unit.
Step 2 Position the cable voice adapter over the support stand, aligning the two pegs on the stand with the large
holes in the front and middle of the cable voice adapter's side panel. The side rails on the support stand
must be supporting the rear half of the cable voice adapter. See Figure 3-1:
OL-0799-02 (05/2001)
Cisco CVA122/CVA122E Hardware Installation Guide
Physical Placement
3-5