Cisco CVA122 Hardware Installation Manual page 74

Physical, Power, and Environmental Specifications
Table A-1 Cisco CVA122/CVA122E Cable Voice Adapter Physical Specifications (continued)
Description
Vibration, operating
Vibration, nonoperating
Software requirement
Agency approvals
1. VAC = volts alternating current.
2. A = ampere.
3. AWG = American Wire Gauge.
4. Hz = hertz.
5. dBa = adjusted decibels.
Cisco CVA122/CVA122E Hardware Installation Guide
A-2
Specification
10 to 200 Hz, 0.0005 g (1 oct./min.)
10 to 100 Hz, 0.0065 g (1 oct./min.)
Cisco CVA122/CVA122E Cable Voice Adapter software—Cisco IOS Release 12.2(1)XA
or higher
Safety: CSA 950-95 (Third Edition), IEC 950 (Second Edition with Amendments 1, 2, 3,
and 4), EN60950:1922 (with Amendments 1, 2, 3, 4, and 11), AS/NZS 3260:1966 (with
Amendments 1, 2, 3, and 4), TS001:1997.
Emissions: CFR 47 Part 15 Class B, EN55022 Class B, VCCI Class B,
AS/NRZ 3548:1992 Class B, ICES-003 (Issue 2, Class B, April 1997)
See also Appendix C, "Regulatory Compliance and Safety Information."
Appendix A Technical Specifications
OL-0799-02 (05/2001)