System Configuration And Maintenance - RCA Product Manual

Product Manual – INTUITION HT

SYSTEM CONFIGURATION AND MAINTENANCE

System configuration and maintenance functions can be performed in two different modes – Manager Mode and
Super User Mode. These modes, which are accessed using different passwords, provide access to different functions
on the Manager Control Panel (see "Accessing the Manager Control Panel" below).
Note: Access to the Super User Mode should be restricted to avoid making undesired changes to the system
configuration.
ACCESSING THE MANAGER CONTROL PANEL
The Manager Control Panel is used to access configuration and maintenance functions ( fig. 8 ). Options available on
this panel depend on whether you log into the Manage Mode or the Super User mode. To access this panel:
1. If the attract loop is playing, touch the Start Here button to move to the Welcome screen.
2. Touch the MTI logo (upper left-hand corner) three times.
3. A password prompt appears.
> To operate the system in Manager Mode, enter the Manager Mode password (default from
factory is 9751); then press Submit.
> To operate the system in Super User Mode, enter the Super User password (369258147); then
press Submit.
Note: You are given three tries to enter the correct password. If you are unsuccessful, you must exit
and re-enter this section again.
Configure Chains
option only
available in Super
User Mode
fig. 8 – Manager Control Panel – Super User Mode
SETTING/RESETTING PASSWORDS
1. From the Manager Control Panel, touch Set/Reset Password.
2. On the Set/Reset Password screen, enter the current password and the new password in the appropriate fields.
Enter the new password again in the confirm password field; then press Submit.
3. The system notifies you that the password has changed.
Note: Keep a careful record of the password.
7