Advertisement
6
GREEN BAG
STEP
6a
Connect
handlebar wire harness (a) and the
seat rail wire harness (b) together. The
wire harness connectors are slotted,
so they may only be connected one
way; do not force them!
• Lift the seat lever and slide the seat
frame to the back end of the seat rail,
pulling the seat rail wire harness tight,
but not overly tight. Secure the wire
harness using the plastic strap located
at the end of the seat frame.
• Attach one seat stop to the seat stop
axle using the included bolt and
washer. Slide this seat stop assembly
through the hole in the seat rail. Attach
the other end of the seat stop with the
other included bolt and washer.
• Press the seat frame end cap into
the seat rail and secure with two bolts
(55
L x 8
MM
MM
• Mount the seat rail end cap onto the
seat frame with two screws.
6b
Secure the wire harness using
the plastic strap located in the middle
of the seat frame.
• Mount the bottom seat pad with
four bolts (55
lock washers (M6 1.0T), using the
Black-handled 4
the
seat
mount
D).
L x 6
D) and four
MM
MM
Allen wrench.
MM
6
STEP
6a
6b
621-D East Lake Street • P.O. Box 280 • Lake Mills. WI 53551
toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373
www.visionfitness.com
2000 Vision Fitness. All Rights Reserved. 5.00 Part #Z26RB35-001
REV2
7
Advertisement
