INDEX PAGE SAFETY INSTRUCTIONS WARRANTY CONDITIONS AND LIABILITY APPROPRIATE USE TECNICAL DATA CHART OF TYPES A334 OPERATION LEVERS OPERATION SPARE PARTS LIST 13.2611.01 SEAL CONTROL SEAL ADJUSTMENT MAINTENANCE CLEANING SAFETY INSTRUCTIONS Read these instructions carefully. Failure to follow these instructions can result in severe personal injury.
Page 3
Joints You are fully responsible to review the joints made by your tool. Become familiar with the seal control and seal adjustment described in this operation manual. Misformed joints may not secure the load and could cause serious injury. Never handle or ship any load with improperly formed joints. Dispensing strap Only dispense strap from a dispenser specifically designed for strap.
WARRANTY CONDITIONS AND LIABILITY FROMM Holding AG warrants all its strapping tools and machine heads during a period of 90 days from the date of sale. The warranty includes all deficiencies clearly resulting from poor manufacturing or faulty materials. Damage claims as a result of production shutdowns and claims for damage to persons and to property resulting from warranty deficiencies cannot be asserted by the customer.
OPERATION When handling strap, always wear protective gloves and safety glasses with side shields which conform to ANSI Standard Z87.1. Feeding the strap around the package The strapping is fed around the package in the direction as shown in the illustration. The strapping end is held tightly with the left hand and pulled firmly towards the operator with the right hand.
Page 7
Tensioning the strap The tool is held tightly with the left hand being placed on the sealing handle. The tensioning handle is now moved forward and backward with the right hand until the desired tension is attained. Sealing the strap The sealing handle is moved forward using the left hand until it hits the stop.
SPARE PARTS LIST 13.2611.01 13.2611.01 A334/19/0.80 A334.0005.01 31.03.06 Item-No. in group Pcs. Description Dimension Field A33.1163 1 SOCKET SET SCREW A33.1201 1 RELEASING BOLT A33.1202 1 ROD BAR A33.1207 1 COVER [A33.1208] 1 CAM A33.1209 1 RELEASING HEAD A33.1210 1 RELEASING ROD A33.1213...
Page 11
13.2611.01 A334/19/0.80 A334.0005.01 31.03.06 Item-No. in group Pcs. Description Dimension Field A3.1410 1 BOLT N1.1107 2 SCREW M4 X 10 N1.1113 7 SCREW M5 X 20 N1.1115 2 SCREW M8 X 40 N1.1139 A33.1227 1 SCREW M10 X 16 N1.1140...
Page 12
13.2611.01 A334/19/0.80 A334.0005.01 31.03.06 Item-No. in group Pcs. Description Dimension Field N2.5182 1 PRESSURE SPRING 0.63 X 5.5 X 27/15.5 N2.5324 1 TENSIONING SPRING 2 X 10.2 X 120 N2.5606 1 CUP SPRING 40 X 20.4 X 1 N3.2326 1 NEEDLE CASE 18 X 24 X 16 N3.2327...
SEAL CONTROL A regular control of the seal is necessary. The seal can be checked visually and the person controlling can easily judge the quality of the seal. When checking the seal the following illustrations must be compared. Correct seal A correct seal must be conform to the illustration.
10 SEAL ADJUSTMENT The depth of the sealing mechanism and the cutter can be adjusted by displacing the stop.Place the tool as shown and loosen the screw with an allen key. After displacing the stop retighten the screw. • If sealing depth is not sufficient reset stop in the direction of the base plate. •...
11 MAINTENANCE Disassembly / Assembly If base plate was removed for service- or repair works it is important to retighten the two screws N1.1185 with tightening torque of 120 Nm / 87 ft lb when assemble. N1.1185 12 CLEANING In case of heavy dirt and when painted straps are used the punch, dies, gripper and feed-wheel must be cleaned regularly.
Page 16
A334T2.en.fm For Parts & Service 1-877-862-6699...
Need help?
Do you have a question about the A334 and is the answer not in the manual?
Questions and answers