optiClient5d_QuickRef.fm
Quick Reference Guide for optiClient 130
The optiClient 130 menu
●
is opened as a context menu of the main bar (right-click an unassigned area on the main
bar) and provides some general functions.
Using the phone
Available as integrated and/or free phone.
●
The Display is used in the dialog with the connected communication system (call displays,
●
menu prompts for the service menu).
The function, dialing, and dialog keys can be activated (optional) and operated like the keys
●
available on a desktop device.
Using the easyCom communication circle
The large central circle symbolizes you (your call number). Other participants are shown in
●
small connection circles.
Flashing circles indicate connection requests (incoming or outgoing)
●
If you position the cursor on a connection circle, a ring appears. You can activate telephony
●
functions in the ring and also in the context menu for the connection circle.
To establish a connection, enter the Call number and then click Call .
●
Accepting a connection request
A connection request can be accepted in various ways:
–
Press the green "Lift Handset" button
–
Press the key on the PC keyboard that was configured system-wide for acceptance.
–
If you have a configured terminal with a handset, pick up the handset.
–
If the easyCom window is active, drag the flashing connection circle into the central
circle.
Disconnecting an active connection
An active connection can be disconnected in various ways:
–
Press the red "Replace Handset" button
–
Press the key on the PC keyboard that was configured system-wide for disconnecting.
–
If you have a configured terminal with a handset, replace the handset .
–
If the easyCom window is active, click the "Disconnect" symbol on the ring for the con-
nection circle or drag the connection circle out of the central circle.
Setting up a connection
You have various options here as well:
–
Use the key field of the optiClient 130 phone.
–
Use the number keys on your PC keyboard
–
Search for a contact from a directory and dial that contact directly from its context
menu (right-click).
–
Drag the contact from the contact directory to the display.
–
Add a number to the display from the Windows clipboard. ("copy & paste").
–
Drag the number to the display ("Drag & Drop").
2 of 4
Nur für den internen Gebrauch
A31003-G2550-Q100-6-7619, 04/2005
optiClient 130, Quick Reference