First Flight Preparation; Flying Checklist; Installing The Propellers; Assembly - Blade Stealth Conspiracy 220 Instruction Manual

EN

First Flight Preparation

• Remove and inspect contents
• Begin charging the fl ight battery
• Assemble the aircraft
• Program your computer transmitter
• Install the fl ight battery in the aircraft
(once it has been fully charged)
• Bind your transmitter
• Familiarize yourself with the controls
• Find a suitable area for fl ying

Installing the Propellers

1. Refer to the illustration for the proper motor rotation and
propeller location.
2. The propellers have "CW" or "CCW" marked on one
blade to show proper location and rotation. Match the
propeller location to the illustration.
3. Secure the propellers using the provided lock nuts.
Do not overtighten the nuts as damage to the propellers
or motors may result.

Assembly

A
C
B
4

Flying Checklist

❏ Always turn the transmitter on fi rst
❏ Plug the fl ight battery into the lead from the ESC
❏ Allow the ESC to initialize and arm properly
❏ Fly the model
❏ Land the model
❏ Unplug the fl ight battery from the ESC
❏ Always turn the transmitter off last
CW
CCW
Assemble and Install the Optional Camera Mount
If you wish to use an additional camera to record your
fl ights, follow the directions below to assemble and
install the optional video camera mount.
1. Assemble the camera mount as shown (A).
Do not fully tighten the screws.
Use removable thread locking compound to
keep the screws from loosening due to vibration.
2. Remove the 8 screws holding the top plate to
the quadcopter (B).
3. Carefully lift the top plate away from the frame.
4. Position the tabs of the camera mount into the
slots in the top frame.
5. Using 4 screws and thread locking compound,
secure the camera mount through the bottom of
the top plate and into the bottom camera mount
standoffs (C).
6. Tighten all the screws in the camera mount.
7. Feed a hook and loop strap through the top plate
slots as shown (C).
8. Re-attach the top plate to the quadcopter frame
using thread locking compound and the 8
screws removed in step 2.
CCW
CW