Emerson FISHER FIELDVUE DLC3010 Instruction Manual page 12

DLC3010 Digital Level Controller
Introduction and Specifications
May 2018
Table 1‐6. Caged Displacer Sensors
TORQUE TUBE
SENSOR
ORIENTATION
(3)
249
249B, 249BF
Torque tube
arm rotatable
with respect to
equalizing
connections
(3)
249C
249K
249L
1. Standard displacer lengths for all styles (except 249) are 14, 32, 48, 60, 72, 84, 96, 108 and 120 inches. The 249 uses a displacer with a length of either 14 or 32 inches.
2. EN flange connections available in EMA (Europe, Middle East and Africa).
3. Not available in EMA.
4. The 249BF available in EMA only. Also available in EN size DN 40 with PN 10 to PN 100 flanges and size DN 50 with PN 10 to PN 63 flanges.
5. Top connection is NPS 1 ring‐type joint flanged for connection styles F1 and F2.
Table 1‐7. Cageless Displacer Sensors
Mounting Sensor
(4)
249BP
249CP
Mounts on
top of vessel
(5)
249P
Mounts on
249VS
side of vessel
Mounts on top of
vessel or on
249W
customer
supplied cage
1. Standard displacer lengths are 14, 32, 48, 60, 72, 84, 96, 108, and 120 inches.
2. Not used with side‐mounted sensors.
3. EN flange connections available in EMA (Europe, Middle East and Africa).
4. Not available in EMA.
5. 249P available in EMA only.
6. Wafer Body only applicable to the 249W.
12
(1)
STANDARD CAGE, HEAD,
AND TORQUE TUBE ARM
MATERIAL
Cast iron
(4)
Steel
316 stainless steel
Steel
Steel
(1)
(2),
Standard Head Wafer
(6)
Body and Torque Tube
Arm Material
Steel
316 Stainless Steel
Steel or stainless steel
WCC (steel) LCC (steel), or
CF8M (316 stainless steel)
WCC, LCC, or CF8M
WCC or CF8M
LCC or CF8M
EQUALIZING CONNECTION
Style
Screwed
Flanged
Screwed or optional socket weld
Raised face or optional ring‐type joint
flanged
Screwed
Raised face flanged
Raised face or optional ring‐type joint
flanged
Ring‐type joint flanged
Flange Connection (Size)
NPS 4 raised face or optional ring‐type joint
NPS 6 or 8 raised face
NPS 3 raised face
NPS 4 raised face or optional ring‐type joint
NPS 6 or 8 raised face
For NPS 4 raised face or flat face
For NPS 4 buttweld end, XXZ
For NPS 3 raised face
For NPS 4 raised face
Instruction Manual
D102748X012
PRESSURE RATING
Size (NPS)
1‐1/2 or 2
CL125 or CL250
2
1‐1/2 or 2 CL600
CL150, CL300, or
1‐1/2
CL600
CL150, CL300, or
2
CL600
1‐1/2 or 2 CL600
CL150, CL300, or
1‐1/2
CL600
CL150, CL300, or
2
CL600
1‐1/2 or 2 CL900 or CL1500
(5)
2 CL2500
(3)
Pressure Rating
CL150, CL300, or CL600
CL150 or CL300
CL150, CL300, or CL600
CL900 or 1CL500
(EN PN 10 to DIN PN 250)
CL150, CL300, CL600, CL900,
CL1500, or CL2500
CL125, CL150, CL250, CL300,
CL600, CL900, or CL1500
(EN PN 10 to DIN PN 160)
CL2500
CL150, CL300, or CL600
CL150, CL300, or CL600
(2)