Emerson FISHER FIELDVUE DLC3010 Instruction Manual page 113

Instruction Manual
D102748X012
Gain
The ratio of output change to input change.
Hardware Revision
Revision number of the Fisher instrument
hardware. The physical components of the
instrument are defined as the hardware.
HART (acronym)
The acronym HART stands for Highway
Addressable Remote Transducer. The
communications standard that provides
simultaneous analog and digital signal
transmission between control rooms and field
devices.
HART Tag
See Tag
HART Universal Revision
See Universal Revision
Instrument Serial Number
The serial number assigned to the instrument,
which appears on the nameplate.
Lower Range Value (LRV)
The value of the process variable that the digital
level controller is currently configured to map to
the 4 mA endpoint in the 4 to 20 mA loop.
Lower Sensor Limit (LSL)
Lowest value of the process variable that the
digital level controller can assign to a range value.
Computation of an actual sensor limit for this
device would require a complex dynamic
algorithm dependent on much of the
configuration data, process temperature, and
other factors not currently available to the
firmware.
DLC3010 Digital Level Controller
Memory
A type of semiconductor used for storing
programs or data. FIELDVUE instruments use
three types of memory: Random Access Memory
(RAM), Read Only Memory (ROM), and
Non‐Volatile Memory (NVM). See also these
listings in this glossary.
Menu
A list of programs, commands, or other activities
that you select by using the arrow keys to
highlight the item then pressing ENTER, or by
entering the numeric value of the menu item.
Message
Thirty‐two character field for any additional
information the user may want to include.
Multidropping
The connection of several field devices to a single
communications transmission line.
Non‐Volatile Memory (NVM)
A type of semiconductor memory that retains its
contents even though power is disconnected.
NVM contents can be changed during
configuration unlike ROM which can be changed
only at time of instrument manufacture. NVM
stores configuration data.
On‐Line Configuration
Configuration of the digital level controller
operational parameters using a Field
Communicator connected to the instrument.
Parallel
Simultaneous: said of data transmission on two or
more channels at the same time.
Polling Address
Address of the instrument. If the digital level
controller is used in a point‐to‐point
configuration, set the polling address to 0. If it is
used in a multidrop configuration, or split range
application, set the polling address to a value
from 0 to 15.
Glossary
May 2018
113