Panel Installation - McQuay 5CKY10C Installation Manual

Panel Installation

• The front panel can only be fitted in one direction.
• Open the air intake grille by pulling back the catchers and removing it together with filter from panel.
• Install the front frame panel onto the indoor unit by 4 screws and tighten it completely to prevent cool air leakage.
• Connect the LED wire and air swing wire to the indoor unit.
From
Front
Panel
NOTE
Install the front frame panel firmly to prevent cool air leakage which will cause condensation and water dripping.
Cool
Air
Good Installation
Open
LED Wire
Air Swing Wire
Indoor Unit
Air Leak
Ceiling Board
Panel
1-7
Screw
From Control Box
Cool
Air
Air Leak
Ceiling Board
Bad Installation
Panel