4
Insert the EndoTherapy accessory slowly and
straight into the slit of the biopsy valve.
5
Hold the EndoTherapy accessory at a point
approximately 4 cm from the slit of the biopsy
valve and advance it slowly and straight into
the slit using short strokes while observing the
endoscopic image.
NOTE
When the tip of the EndoTherapy accessory extends approximately 1 cm from the
distal end of the endoscope, the accessory will appear in the endoscopic image.
BF-190 Series OPERATION MANUAL
4.3 Using EndoTherapy accessories
Figure 4.6
4 cm
Figure 4.7
Ch.4
63