Olympus BF-P190 Instructions Manual page 100

EMC information

Guidance and manufacturer's declaration — Electromagnetic
immunity
This model is intended for use in the electromagnetic environment specified below. The
customer or the user of this model should assure that it is used in such an environment.
Portable and mobile RF communications equipment should be used no closer to any part of this
model, including cables, than the recommended separation distance calculated from the
equation applicable to the frequency of the transmitter.
Immunity test
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
App.
Definition
94
IEC 60601 Compliance
test level
3 Vrms 3 V (V
(150 kHz – 80 MHz)
3 V/m 3 V/m (E
(80 MHz – 2.5 GHz)
Where "P" is the maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer and "d" is the recommended separation distance in meters (m).
NOTE
• At 80 MHz and 800 MHz, the higher frequency range applies.
• These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
• Electromagnetic interference may occur in the vicinity of high-frequency
electrosurgical equipment and/or other equipment marked with the following
symbol:
BF-190 Series OPERATION MANUAL
Electromagnetic environment — Guidance
level
Recommended separation distance
)
3.5
1
-------- -
d =
V
1
Recommended separation distance
)
3.5
1
-------- -
d =
E
1
7
---- -
d =
E
1
P
P
80 MHz – 800 MHz
P
800 MHz – 2.5 GHz