TABLE OF CONTENTS 2 J-Lite Features 3 Check Calibration 3 Taking a Reading 3 Understanding Your Readings 4 Meter Readings 5 Temperature Correction Table 5 Pin Talk 6 Care of Your Meter 6 Service For Your Meter 7 Warranty Species Correction Chart on Back Cover 1.800.561.8187...
5/16” penetration External Connector Readout Read Button Calibration Check Button J-LITE FEATURES hResistance technology recognized worldwide as the most accurate method for measuring moisture h6% to 30% moisture range hLED readout hProven microcontroller circuit for increased reliability and accuracy...
See the species correction table for more information. Since the J-Lite displays %MC in a “range” between two values, corrections for pin, temperature, and species have less impact on the accuracy of the meter readings, especially below 12%.
Between 27.6 and 30.0 Blinking 30% Above 30% The J-Lite can be used to test more than just wood. It will also give a relative reading on plywood, OSB, particleboard and MDF or can be fitted with a 26-ES slide hammer for specific applications.
CARE OF YOUR METER To keep your meter in good working order: hStore your meter in a clean, dry place. The protective carrying case provided is an ideal storage place when the meter is not in use. hChange the 9-Volt battery as needed. Continued use with a low battery may cause the meter to go out of calibration.
Need help?
Do you have a question about the J-Lite and is the answer not in the manual?
Questions and answers