Easy Set-Up - ABB 266HSH Operating Instructions Manual

8 Operation

8.7.1 Easy Set-up

The firtst entry of the Easy Set up menu allows users
to select display language. Five selections are
possible: English, French, German, Spanish and
Italian.
Users can select here the engineering unit by
pressing 'Ok' 'Next' key is to be used to move to the
next menu item.
These two subsequent entries allow users to set the
Lower Range Value (LRV) and Upper Range Value
(URV). If the inserted value exceeds the limits,
warning messages come out.
By browsing this menu, users can select the
linearization type. Four selections are available:
Linear, Custom Linearization Curve, Cylindrical Lying
Tank and Spherical Tank.
Setting the desired value for damping allows the user
to filter out unwanted noise on the signal
transmission. Increasing damping will make the
instrument slower in its response to step changes.
Value can go from 0 to 60 seconds.
This submenu allows user to set the display view.
One or two lines with our without bargraph are the
options users can choose among. In addition it is
possible to assign a defined value to be shown to
each line.
This function allow users to erase the bias if applied
through the following submenu. Simply press "ok"
key to reset the Bias.
This function set to zero the PV value and to 1 V the
analogue output. Simply press "ok" key to activate
the PV to zero function.
20 OI/266/LowP-EN Rev.A | 2600T Series Pressure transmitters