Removing the display back-cover and antenna
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
3
Remove the
wireless
card.
4
Remove the
rear
cover.
5
Follow the procedure from step 1 to step 17 in
6
Remove the
display
assembly.
7
Remove the
display
bezel.
8
Remove the
display
hinges.
9
Remove the
display
panel.
10
Remove the
display
cable.
11
Remove the camera.
Procedure
1
Peel the tape that secures the camera cable to the display back-cover and antenna assembly.
2
Note the camera cable routing and remove the camera cable from the routing guides on the display back-cover and antenna assembly.
computer. After working inside your computer, follow the instructions in
Removing the computer
www.dell.com/
base.
Removing the display back-cover and antenna assembly
53
assembly
After working inside
93