WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
NOTE:
The rubber grommets may get pushed out while replacing the speaker. Ensure that the rubber grommets are in their
position after placing the speaker on the system board.
1
Using the alignment posts, place the left speaker on the computer base.
2
Route the speaker cable through the routing guides on the computer base.
3
Using the alignment posts, place the right speaker on the computer base.
4
Route the speaker cable through the routing guides on the computer base.
5
Connect the speaker cable to the system board.
Post-requisites
1
Follow the procedure from step 7 to step 23 in
2
Replace the
rear
cover.
3
Replace the battery.
4
Replace the
base
cover.
46
Replacing the speakers
computer. After working inside your computer, follow the instructions in
Replacing the computer
Replacing the speakers
www.dell.com/
base.
24
After working inside