Fan - HP 15 Maintenance And Service Manual

Fan

Description
Fan for use in models with discrete graphics
Fan for use in models with UMA graphics
Before removing the fan, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
Remove the fan:
1. Disconnect the fan cable from the system board (1).
2. Remove the Phillips M2.5×6.0 screw (2) that secures the fan to the computer.
3. Lift the fan from the computer (3).
Reverse this procedure to install the fan.
56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Optical drive on page
Bottom cover on page
Battery on page 40).
33).
37).
Spare part number
L20473-001
L20474-001