Speakerphone; Peration; Call Timer; Pre-Dialing Telephone Numbers - RCA 25204 User Manual

Telephone Operation
Receiving Calls with the Optional Headset
When the phone rings, the corresponding line's indicator flashes rapidly.
1. Press the HEADSET button, and the phone automatically selects the line using
the headset.
2. When you are finished, press HEADSET.
NOTE: Whether you are making or receiving a call, the caller is disconnected if you press another line
without putting the call on hold first.
NOTE: To converse using the headset, the handset must be placed in the cradle.
Switching Between the Speakerphone, Handset, and Headset
To switch to the speakerphone, press SPEAKER. The speakerphone indicator turns on.
To switch to the handset, pick up the handset. The speakerphone or headset turns off.
To switch to the headset, press HEADSET. The headset indicator turns on. Place the
handset in the cradle.

Pre-Dialing Telephone Numbers

Pre-dialing lets you enter , check , and edit a telephone number before engaging the line.
There are several ways to pre-dial a telephone number:
• M anually enter the telephone number, or
• P ress one of the 16 memory location buttons, or
• P ress DIR, followed by the 5 or 6 button to search the phone book memory.
• P ress CID, followed by the 5 or 6 button to scroll the CID memory,
Then -
1. Press the DIAL button. The phone automatically selects a line and turns on the

speakerphone.

2. Dial the number showing in the display.

Call Timer

During a phone conversation, a built-in call timer displays the length of the call in
minutes and seconds. When the call is finished, total time shows in the display for about
10 seconds. A call is timed even while it is on hold.
20