Telephone Operation; Making Calls With The Corded Handset; Making Calls In Speakerphone Mode; Making Calls With The Optional Wired Headset - RCA 25216RE1 User Manual

Telephone Operation

Making Calls with the Corded Handset

1. Pick up the handset. The unit will automatically select an available land line. If both land lines are available, Line 1
button. -OR-
Press the Line 1, Line 2 or Cell button and then pick up the corded handset to select the desired line.
2. Wait for a dial tone, and then dial a phone number using the dial-pad, the directory or a one-touch speed dial.

Making Calls in Speakerphone Mode

1. Press the speaker button. The unit will automatically select an available land line. If both land lines are available,
-OR-
Press the Line 1, Line 2 or Cell button to select the desired line, and the speakerphone will engage automatically.
2. Wait for a dial tone, and then dial a phone number using dial-pad, the directory or a one-touch speed dial.

Making Calls with the Optional Wired Headset

1. Plug the headset into the Headset jack on the side of the unit.
3. Press the headset button on the phone.
5. Wait for a dial tone, and then dial the phone number using the dial-pad, the directory or a one-touch speed
dial. -OR-
Press the Line 1, Line 2 or Cell button and then press the headset button to select the desired line.
NOTE: If the headset is not connected (or if not completely inserted into headset jack), an error tone is
heard when the Headset button is pressed.
NOTE: Headset performance may vary widely depending on the quality of the headset.

Making Cellular Calls

1. In standby mode, dial the desired number, press Cell button. - OR -
Use the VOL (- or +) button to select the desired record in record review mode, then press the Cell button. - OR -
Press the corresponding speed dialing number button, then press Cell (SKR) button.
Note: The device selected under the Priority Device menu will be the device that is automatically
selected by your 25216 phone.
Note: If the user needs to dial using an alternate (non-priority) cell phone that has previously been paired,
press the Bluetooth button to view the paired devices, scroll to the desired device, then press the Dial soft
key to make the call.
2 . Pick up the corded handset to switch to receiver mode.
3. Place the corded handset in the base cradle when nished.

Pre-Dialing

1. With the phone idle, manually enter the telephone number.
2. Press the Speaker button or line1 or line 2 button to take a line, or pick up the corded handset (on the base
cradle) and then the telephone number will be dialed out.
NOTE: The maximum pre-dialing number length is 32 digits, if the number is over 32 digits, the
phone will emit an error tone.
17
Bluetooth®
ell