Do Not Disturb; Voice Messaging - RCA 25204 User Manual

Do Not Disturb

This feature disables an incoming call ring, within the time duration you selected. You can
program the do not disturb duration.
1. While the handset is on the cradle, press DND button. The DND indicator flashes.
2. Use the 5 or 6 button to select the duration. You may choose from 15 minutes, 30
minutes, 45 minutes, 1 hour, or 2 hours and increase the duration by 1 hour intervals
up to 24 hours.
3. Press the Sel/Save button to save your selection.
4. When the Do Not Disturb function is on, the DND indicator flashes. To turn off Do Not
Disturb, press the DND button.
NOTE: When Do Not Disturb is On, you will still receive a ringing line indication, CID information, and
New Call indicators.

Voice Messaging

Provided your phone company offers voice messaging service and you subscribe to it,
the VOICE MAIL indicator on the base flashes to indicate a message is waiting. It stops
flashing after the message is reviewed.
IMPORTANT: You must have the voice mail access code programmed for this feature to work. See
"Storing a name and number in memory."
1. Pick up the handset, or press HEADSET or SPEAKER.
2. Press VOICE MAIL 1 for line 1 voicemail or VOICE MAIL 2 for line 2 voicemail.
3. The unit auto dials the pre-programmed voice mail access number/code so you can
access the voice mail stored at the phone company.
To Turn Off the Voice Messaging Indicator:
1. In the idle mode, press and hold the Voice Mail 1 button for 2 seconds.
2. Then, the display will show CLEAR VOICE MAIL INDICATION?.
3. Press Sel/Save button to confirm. Then, the Voice Mail 1 indicator will be turned off.
4. Repeat the above steps and press Voice Mail 2 button instead of Voice Mail 1 button
to turn off Voice Mail 2 indicator.
Telephone Operation
2