Replacing The Wiper - Hach SOLITAX sc User Manual

Maintenance

5.3 Replacing the Wiper

Figure 8 Wiper Replacement
1. Wiper arm
2. M4 hex socket head bolt
20
The life of the wiper is dependent on the number of cleaning actions performed and the
type of deposits to be removed. The life of the wiper varies. The wipers supplied with the
instrument should last for approximately one year.
1. From the Main Menu, select SENSOR SETUP and press confirm.
2. Select the appropriate sensor if more than one is attached and confirm.
3. Select TEST/MAINT and press confirm.
4. Select PROFILE and confirm. Change the wiper, see
5. Select RESET CONFIG and confirm.
6. Select MAN. RESET ARE YOU SURE? and confirm.
1 2
section 5.3 on page
3
4
3. Wiper
4. Wiper axle
20.