Setting Up The Handset For Use - Gigaset E550 Manual

a
• The power adapter must always be connected, as the phone will not operate without
a mains connection.
• Use only the power adapter and phone cord supplied. Pin connections on telephone
cables can vary (pin connections
Connecting the charger (if included)
¤
Connect the flat plug on the power adapter
1.
¤
Plug the power adapter into the plug
socket 2.
Remove the plug from the charging cradle
To disconnect the plug from the charger, press the release
button and disconnect the plug 4.
3

Setting up the handset for use

The display is protected by a plastic film. Please remove the protective film!
Inserting the battery and closing the battery cover
a
Use only rechargeable batteries (
GmbH, as this could otherwise result in significant health risks and personal injury. For
example, the outer casing of the batteries could be destroyed or the batteries could
explode. The phone could also malfunction or be damaged as a result of using batteries
that are not of the recommended type.
¢
page 43).
2
¢
page 42) recommended by Gigaset Communications
First steps
1
4
3
11