Making Internal Calls; Using The Redial List - Gigaset E550 Manual

Making internal calls

Internal calls are free calls between handsets that you have registered to the same base.
¤
u
(press briefly)
Select the handset or Call All (group call) from the list if required.
u
Holding down immediately starts a call on all registered handsets.
Accepting an internal call
Your telephone rings and the internal number of the caller (e.g., INT 2) or the assigned name
appears in the display.
Press the talk or handsfree key c/d on the handset to accept the call.
Ending a call
Press the end call key a on the handset.
Transferring a call to another handset/internal consultation
Transferring an external call: You have two options to transfer the call:
¤
Wait until the participant called answers, then hang up:
Press the End call key a.
Or:
¤
Hang up before the participant answers: Press the End call key a.
If the participant called does not answer or does not transfer the call, end the consultation call
with Back.
External call, internal consultation:
¤
u
The list of handsets is opened.
select one handset or Call All
Accepting a waiting call
If you receive an external call while conducting an internal call, you will hear the call waiting
tone (short beep). The caller's number will appear in the display if phone number identification
is enabled.
¤
Press the end call key a on the handset to end the internal call.
¤
Press the talk key c on the handset to accept the external call.

Using the redial list

The redial list contains the ten numbers last dialled with the handset (max. 30 digits). If one of
the numbers is in the directory, the corresponding name will be displayed.
Dialling from the redial list
c
Press the talk key.
q
Select an entry.
c
Press the talk key. The number is dialled.
The list of handsets is opened. Your own handset is indicated by
¤
¤
c or OK.
If more than two handsets are registered to the base,
Making calls
<
¤
c
¤
q
.
23