FT-50 Fill Level Inspector Operation Guide
Container Changeover
Selecting the Container Type to be Inspected
2-4
The FT-50 is equipped will certain features that allow you to change
between different container types easily. If the production line the FT-50
is installed on is designed to produce more than one size or type of
container, this procedure will explain how to reconfigure the unit for a
different container type.
To accomplish a container changeover you must do the following:
•
Select the container type to be inspected.
•
Adjust the inspection head height.
•
Adjust the conveyor guide rails.
•
Adjust the centerline trigger bracket height
•
Adjust as need any option sensors and senor brackets installed.
Before you can select a particular container type, the parameters for that
container type must be programmed into the FT-50. This should have
been done by your Service Department.
1. Press Key 5 until Current Container Type appears.
2. Use the Arrow Key to select the desired container type. After you
select the container type a message will appear asking you to wait
while the FT-50 reconfigures itself for the new container type.
Industrial Dynamics Company, Ltd. Document 40272-0700