Olympus E-3 User Manual page 24

Hide thumbs Also See for E-3:

Table of Contents

arrow key to select the function you want and then press OK

again to confirm your choice.

Another way to do this is to press the OK button to place a

yellow cursor box on a control option. Use the arrow pad keys to

move the cursor so that it highlights the control you wish to

change.

Now, turn any of the input dials on the camera and observe the

highlighted cursor box. Each click of the input dial will cycle the

highlighted display box to the next available option for the control

you have highlighted. As an example, let's change the AF mode

again but by using the input dials and the arrow pad in

combination to speed up the process.

Below the arrow pad you will find a round button marked IS.

This controls the status of the image stabiliser built-into the

camera.

There are two main settings and one sub-option for this. Pressing

the button and using the arrow keys or input dials will scroll

through the options IS1 and IS2.

IS1 compensates for vertical and horizontal camera movements

and is thus a good general purpose setting for most photography.

IS2 only compensates for vertical movement. This permits you to

do panning shots (tracking of moving vehicles, running athletes

Table of Contents