Olympus E-3 User Manual page 97

activated to identify any "stuck" or
"dead" pixels and then fills-in data
from the four surrounding pixels to
avoid producing files with "odd"
coloured specks in them. Use this
every 6 months or so or before an
important assignment if the camera
is in heavy, sustained use.
(UMPg130)
FIRMWARE Displays firmware version loaded in
camera and the attached lens (each
is independent). At time of writing
current E-3 body release was
Version 1.2. Check for updates via
Olympus Master software using USB
cable linked to your computer while
on-line. Ensure battery is fully
charged prior to connecting to
update firmware.
(UMPg108)
96