Olympus E-3 User Manual page 85

WB (UMPg67):
Select your choice of AUTO* or manual white balance
settings. A full list is provided in the appendices and on
page 67 of the user manual.
ISO (UMPg50):
Choose from AUTO* setting or any option within the
range of ISO100 to ISO3200.
NOISE REDUCTION (UMPg74):
ON* - Camera takes a reading of sensor after shutter has
closed on exposures of 2 seconds or longer to identify
"hot pixels" and then electronically processes the captured
image
information obtained from the reading of the sensor. This
setting does not operate if sequential shooting is in effect.
After a long exposure with noise reduction on, the red
"Card Access" lamp will illuminate until the processing has
completed. No further photography is possible while the
card access lamp is on.
OFF – Does not apply noise reduction to any images
NOISE FILTER (UMPg74):
Applies noise correction to photographs taken at higher
ISO values and/or in low light. Options include OFF,
LOW, STANDARD* and HIGH.
Use HIGH when shooting at high ISO values.
84
to remove erroneous data based on the