Olympus E-3 User Manual page 83

Once you have selected the main area in which you need to
make adjustments, simply press the RIGHT arrow key to open
up the sub-menu pages applicable to that set of controls.
The sub-menus are all arranged in the same manner as the main
menu – that is to say they are logically set out from top to
bottom and then left to right. The most commonly used options
are always at the top of the sub-menu lists in the order in which
you might most usefully expect to require them.
Activating a menu choice is accomplished by either pressing the
OK button on the arrow pad or by touching the shutter button.
Exiting a menu screen without making a choice is accomplished
by the simple expedient of pressing the MENU button again to
return to the previous page. Keep pressing the MENU button
until you are back at the super-control panel or, if you press the
shutter button at any stage, you will immediately return to the
shooting mode.
The various menus and sub-menu options with their settings and
notes on same are hereafter listed in sequence for easy
reference. Factory default settings are marked thus: *
CARD SETUP (UMPg95, 133):
ALL ERASE - removes images from card by marking the
file spaces as available. Folder structure left intact.
FORMAT – Resets all card data including FAT and folder
information on the card.
CUSTOM RESET (UMPg32):
RESET – Resets all custom settings to factory default.
RESET 1 – Only resets custom functions allocated to the
Custom 1 setting memory.
82
CAMERA MENU 1