Operating The Radio - RCA RT2350 User Manual

Operating your Receiver

Operating the Radio

The receiver has a built-in tuner that allows for
AM/FM radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly (see
"Connecting the Antenna" on page 5 section for
details)
2. Press ON/STANDBY to switch on the receiver.
ON/STANDBY
MUTE
3. Press SOURCE keys to enter TUNER mode.
SOURCE
FM/AM
SOURCE
4- To select band, press the FM/AM button to toggle
between AM/FM mode.
SOURCE
FM/AM TUNING
SOURCE
16
TUNIN
MEM
5- Tune the stations by pressing TUNING UP or
DOWN repeatedly until the desired station is found.
Alternatively, you can press and hold TUNING UP or
DOWN for about one second to activate the
automatic SEARCH function. In this mode the receiver
will automatically tune frequencies until it finds a
station
RCE
FM/AM TUNING MEMORY
RCE
NOTE
1. If there is interference, modify the location
of the antenna until the optimal sound is heard.
TV and other electronic devices could be the
cause of interferences so try to position the
antenna away from them.
2. Weak signal can affect the "auto Search
function". Adjust the antenna for better recep-
tion for more efficient search.
Select sound effect if needed by pressing Preset EQ or
DSP sound (see "Advance sound section" for details).
Selecting Mono or Stereo Sound
Press ST/MONO on the main unit or the DIGITAL
button on the remote control to toggle between
mono and stereo sound in FM tuner mode (when
available).
SURR MODE
SETUP TEST TONE EQ DIGITAL INPUT
DSP MODE
ST / MONO
BA
V