Related Manuals for RCA RT2300
Summary of Contents for RCA RT2300
- Page 1 RT2300-rev.1-quickstart 7/27/99 7:01 PM Page 1 do not output the film on this page please turn next page...
- Page 2 RT2300-rev.1-quickstart 7/27/99 7:01 PM Page 2 POWER/STANDBY D I G I TA L VCR 1 VCR 2 TAPE PHONES i g i t a l Audio Video o u n d Integrated Receiver r o c e s s o r...
- Page 3 RT2300-rev.1-quickstart 7/27/99 7:01 PM Page 3 RT2300/RT2300R RT2400/RT2400R Audio/Video Receiver...
- Page 4 RT2300-rev.1-quickstart 7/27/99 7:01 PM Page 4 Quick Connect Guide Dolby Digital equipped for the RT-2300 / RT-2400 can reproduce realistic sound in your listening room. Now start setting up your brand-new receiver. Connect the components Connect the speakers, TV and video component equipped with Dolby Digital decoder, for example, DVD player with Dolby Digital.
-
Page 5: Turn On The Power
RT2300-rev.1-quickstart 7/27/99 7:01 PM Page 5 Quick Connect Guide POWER/STANDBY VCR 1 TAPE PHONES Turn on the Power Plug the AC power cord into a standard household 120V AC outlet. Right after you plugged in the power, a demo message will be appeared in display. - Page 6 Press Test Tone / Setup repeatedly until one of the following shows on the display: Speaker Arrangement Control Note: You can skip this part if you purchase the home theater system with speakers and subwoofer as the receiver has been already calibrated. Display...
- Page 7 RT2300-rev.1-quickstart 7/27/99 7:02 PM Page 7 Quick Connect Guide POWER/STANDBY VCR 1 TAPE PHONES Set Speaker Output Levels Press Test Tone / Setup on receiver or INFO•RDS button on receiver momentarily. A test tone will be generated in each of the speakers.
Need help?
Do you have a question about the RT2300 and is the answer not in the manual?
Questions and answers
How do I turn delay off in tv mode? It sounds like it's buffering all the time.
To turn off the delay in TV mode on the RCA RT2300, set the center and surround speaker delay times to 0 ms. Use the Multi Jog to access the speaker delay settings and adjust:
- DELY C:0ms (Center speaker delay)
- DELY S:0ms (Surround speaker delay)
Then press Multi Jog to confirm the settings.
This answer is automatically generated