Radio; Operating The Radio - RCA RTD255 User Manual

RTD255-EN Radio 3/12/04 10:57 AM Page 2

Radio

Operating the Radio

The receiver has a built-in tuner that allows for AM/FM
radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly.
2. Press ON/STANDBY on the main unit or ON/OFF on the
remote.
3. Press SOURCE on the front of the unit until the tuner
mode is selected. You may also directly press TUNER on the
remote control.
4. To select a band, you may press TUNER again on the
remote control.
When an FM station broadcasts Stereo sound, ST is dis-
played.
38
5. Tune the a station by pressing TUNER + or TUNER - on
the remote control repeatedly until the desired station is
found.
Alternatively, you can press and hold the same button for
about one second to activate the automatic search func-
tion. In this mode the receiver will automatically tune fre-
quencies until it finds a station.
SURROUND SUBWOOFER
DVD D I G I T A L
PRO.LOGIC
VCD L C R
CD INTRORANDOM
MP3 LS LFE RS
6. Repeat steps 5 to tune to another radio station.
Note:
If there is interference, modify the loca-
tion of the antenna until the optimal sound
is heard. TV and other electronic devices
could be the cause of interferences so try to position the
antenna away from them.
Storing radio stations:
The receiver can store up to 40 radio stations in memory.
You can enter every single radio station yourself or the
receiver can store all available radio stations automatically
in an ascending order.
Automatic preset programming :
1. Press SOURCE on the main unit or TUNER on the
remote repeatedly to select TUNER mode.
SUBWOOFER
2. Press TUNER repeatedly on the remote control to select
the FM band.
3. Press and hold TUNER for 3 seconds to start the auto-
matic preset programming.
DVD D I G I T A L
PRO.LOGIC
VCD
L C R
CD INTRORANDOM
MP3 LS LFE RS
Note:
A weak signal can affect the
"Automatic preset programming func-
tion" efficiency. Adjust the antenna
for a better reception and for a more efficient
search. No Automatic preset programming function
for AM mode.
Radio frequencies will be browsed and radio stations
stored automatically. When all the available radio stations
are stored or if all 40 memory locations are full, the auto
preset programming will stop.
Manual preset
1. Select the band by pressing TUNER repeatedly
2. Tune to a radio station (see "Manual tuning" on page 38
above for details)
Radio
3. Press MENU on the remote control. "PROG" will appear
on the display.
SURROUND SUBWOOFER
DVD D I G I T A L
PRO.LOGIC
VCD
L C R
CD INTRORANDOM
MP3 LS LFE RS
4. While the word "PROG" is still flashing, input your
desired preset number (1-40) using the CH+ or CH- on the
remote control, then press MENU again to store it.
D I G I T A L
DVD
VCD PRO.LOGIC
L C R
INTRORANDOM
CD
LS LFE RS
MP3
Retrieving preset stations
1. Press SOURCE on the unit or TUNER on the remote
control to enter the tuner mode.
2. Press PRESET + or PRESET - on the unit or CH+ or CH -
on the remote control to search up or down the preset sta-
tions.
PROGRESSIV
SCAN
EN
39