Fine Setting Of Components - RCA RT2280 User Manual

Advanced Sound Control
Stereo
The Stereo mode uses the two main channel outputs
from the front speakers. Use this mode if you have
connected the front speakers only.
DSP (Digital Sound Processor)
These digital sound effects resemble sounds in a real
environment such as Stadium, Concert, Theater,
Arena, Church, Club. DSP automatically converts ana-
log audio signals to digital ones which enables you to
adjust the sound without degrading the sound quali-
ty. Different modes will give you different feel of size
and type of listening environment. (Not available in
Dolby Digital (DVD))
Night Mode
By using Dynamic Range Compression technology,
you can enjoy enhanced sound quality by Dolby
Digital at night without interrupting your roommates
or neighbors. While enjoying a Dolby Digital enabled
component (DVD, SAT), you can activate Night Mode
by pressing NIGHT button at the front of the receiver,
and this mode will compress the difference in volume
between normal voices and sounds like explosions.
There are two modes (SOFT, SOFTER) for you to
choose the extents of compression.
Fine Setting of the Components
The receiver has pre-selected the best surround mode
for you once you turn on the unit by pressing the
Source Buttons (like DVD, SAT, CD) directly. The
default surround modes for different components are
as table below.
If you decide to change the surround mode, you can
press the SURR MODE repeatedly to toggle among
the different surround mode choices and select the
one you want.
Dolby Digital/Pro Logic
Source/ If Digital Input (optical
Input or coaxial) is selected
DVD Dolby Digital/PRO LOGIC
SAT Dolby Digital/PRO LOGIC
VCR1 N/A
VCR2 N/A
TV N/A
CD STEREO
TAPE N/A
TUNER N/A
The receiver will keep the last selection in memory.
20
3 Stereo Stereo
If Analog Input
is selected
STEREO
PRO LOGIC
PRO LOGIC
PRO LOGIC
PRO LOGIC
STEREO
STEREO
STEREO
Input Signal Setting
The receiver defaults to the most convenient settings
for your easiest use (see table).
If your connection is different from the default set-
ting,
1. Select the source
2. Press FUNCTION
3. Rotate MULTI JOG to toggle among optical/ coaxi-
al/ analog to match your connection. Your selection
will be stored automatically.
6 CH.IN
1
ete Amplifier
HOME THEATER AV SURROUND RECEIVER RT2280
Every time you press the source button, the input set-
ting (e.g. DVD/ OPTI) will be shown on display for a
few seconds.
SOURCE DEFAULT INPUT (as seen on display)
SAT Coaxial (SAT/ COAX)
DVD Optical (DVD/ OPTI)
CD Analog (CD/ ANL)
VCR1 Analog (VCR1/ ANL)
VCR2 Analog (VCR2/ ANL)
FM/AM Built-in Tuner
TAPE Analog (TAPE/ ANL)
TV Analog (TV / ANL)
Digital Input
Select this setting to play digital signals from a DVD,
CD, LD player, SAT or TV.
NOTE
Digital input is only available for DVD, SAT, CD
and TV
Analog Input
Select this setting to play analog signals from a cas-
sette deck, VCR or turntable.
SOURCE AVAILABLE INPUT
SAT ANL/Optical/Coaxial
DVD
ANL/Optical/Coaxial
CD ANL/Optical/Coaxial
VCR1 ANL/ - / -
VCR2 ANL/ - / -
TAPE
ANL/ - / -
TV ANL/ Optical / -
3
FUNCTION
V
2