Digital Connection; Connecting Antennas - RCA RT2280 User Manual

Digital Connections
Read instructions carefully when connecting compo-
nents to the receiver.
Digital In Jacks can accept Dolby Digital (AC-3), or
PCM signals when compatible components are con-
nected.
COAXIAL DIGITAL IN (AUDIO)
Connect to coaxial digital output of
DIGITAL INPUT
DVD, CD, SAT or other compatible
devices.
DVD / CD / SAT
OPTICAL DIGITAL IN (AUDIO)
DVD/CD/SAT
Optical Fiber Cable
Connect to optical digital output of
DVD, CD, SAT or other compatible
devices.
SAT / DVD / CD Player / TV
OPTICAL
DVD/CD/SAT/TV
ANTENNA
DIGITAL INPUT
FM AM
75‰ LOOP
IN IN
DVD/CD/SAT
OPTICAL
PRE OUT
DVD/CD/SAT/TV FRONT L REAR L IN OUT IN
FRONT R REAR R
Connecting the Antennas
RT2280 Rev.0 2001/01/12
DIGITAL INPUT
FM
75‰
IN
DVD/CD/SAT
OPTICAL
PRE OUT
DVD/CD/SAT/TV IN OUT IN
FRONT L REAR L
FRONT R REAR R
The AM and FM antennas connect to the AM and FM
terminals on the system's back panel.
They must be hooked up in order to receive clear
reception.
MODEL NO.: RT2280
300
THOMSON MULTIMEDIA INC.
MONITOR OUT
IN OUT
CENTER SPEAKER (8‰) FRONT SPEAKERS (8‰)
SUBWOOFER (8‰)
8
ANTENNA
AM
LOOP
MODEL NO.: RT2280
IN
300
THOMSON MULTIMEDIA INC.
MONITOR OUT
IN OUT
CENTER SPEAKER (8‰) FRONT SPEAKERS (8‰)
SUBWOOFER (8‰) 8
Getting Started
AM Loop Antenna and FM Indoor Antenna
1. Uncoil the Antenna wire and located the base end
2. Press down on the Antenna tab to open the termi-
nal
ANTENNA
FM AM
75 LOOP
AM Loop Antenna
HINT
• For FM reception, extend antenna to its full
length and arrange the Antenna as a T Shape
• For AM reception, rotate the antenna hori-
zontally to get better reception.
Antenna and Speaker
Wire Connection
Push Speaker terminal tab
down to insert wire.
Release tab to lock wire in
the terminal.
NOTE: Make sure the insulation
is completely removed from the
ends of the Antenna and
speaker wires at all connection
points.
EN
5