Fine Setting Of Components - RCA Scenium RT2660 User Manual

2. Press arrow keys to scroll the Setup menu until
DPLII MUSIC appears on the display. Press OK to
enter DPLII setup.
NG MEMORY
OK
OPEN/CLOSE
3. Use the Up or Down arrow keys to select the desire
option to set (panorama, dimension, center width).
Then press OK to save your selection.
Fine Setting of the Components
The receiver has pre-selected surround mode once
you turn on the unit by pressing the Source Buttons
(like DVD, SAT, CD) directly. The default surround
modes for different components are listed in the
table below.
If you decide to change the surround mode, you can
press the SURR MODE button on the main unit or
theater modes on the remote control repeatedly to
toggle among the different surround mode choices
and select the one you want.
PLII MOVIE PLII MUSIC
Source/ If Digital Input (optical
Input or coaxial) is selected
DVD Dolby Digital/DTS
SAT Dolby Digital/DTS
VCR N/A
V-AUX N/A
TV Dolby Digital/DTS
CD STEREO (PCM)
TAPE N/A
TUNER N/A
The receiver will keep the last selection in memory.
NOTE
If linear PCM source (CD), format will be Dolby
Prologic even with Digital Input.
SETUP TEST TONE
Stereo
PRO LOGIC
If Analog Input
is selected
PRO LOGIC
PRO LOGIC
PRO LOGIC
PRO LOGIC
STEREO
STEREO
STEREO
STEREO
Advanced Sound Control
Input Signal Setting
The receiver defaults to the most convenient settings
for your easiest use (see table).
If your connection is different from the default set-
ting,
1. Select the source
2. Press DIGITAL INPUT button on the main unit or
digital button on the remote control to toggle
among optical/ coaxial/ analog to match your connec-
tion. Your selection will be stored automatically.
The selected source and input source will be dis-
played on the display as long as they are active,
except for some temporary change of display (e.g.
adjusting volume).
Digital Input
Select this setting to play digital signals from a DVD,
CD, SAT or TV.
SOURCE
DEFAULT INPUT (as seen on display)
SAT Analog (SAT/ ANL)
DVD Analog (DVD/ ANL)
CD Analog (CD/ ANL)
VCR
Analog (VCR/ ANL)
V-AUX Analog (V AUX/ ANL)
FM/AM Built-in Tuner
TAPE Analog (TAPE/ ANL)
TV
Analog (TV / ANL)
NOTE
Digital input is only available for DVD, SAT, CD,
V Aux and TV
Analog Input
Select this setting to play analog signals from a cas-
sette deck or VCR.
SOURCE AVAILABLE INPUT
SAT
Analog / Optical / Optical2 / Optical3 / Coaxial
DVD Analog / Optical / Optical2 / Optical3 / Coaxial
CD Analog / Optical / Optical2 / Optical3 / Coaxial
Analog / - / -
VCR
Analog / Optical / Optical2 / Optical3 / Coaxial
V-AUX
Analog / - / -
TAPE
Analog / Optical / Optical2 / Optical3 / Coaxial
TV
EN
21