Switching On/Off; Selection Of Audio/Video Source - RCA RT2280 User Manual

Switching on /off
• To switch on the receiver, press STANDBY/ON but-
ton (1) once. Alternatively, you can press any of the
source buttons to power on the receiver.
STANDBY/ON
6 CH.IN
THEATER AV SURROUND RECEIVER RT2280
• Standby: when the receiver is on, press the
STANDBY/ON button once to activate the standby
mode.
• To switch off the unit completely, unplug the
power cord from the socket
NOTE
Your receiver has a back up memory to keep
your settings like preset radio station for
about 2 weeks in case electricity cut occurs. If
the receiver is unplugged for more than 2
weeks, all the settings will be lost and re-set-
ting will be necessary.
Operating Your Receiver

Selection of Audio/Video source

When one of the source button is pressed, the audio
and video input corresponding to the name will be
activated.
The receiver acts as a switching device between all
the sources that are plugged into to it.
ON OFF TV
VCR 1
DVD•6 CH VCR AM•FM SAT•CABLE
2
CD TAPE
VCR ON OFF TV
1
DVD•6 CH VCR 2 AM•FM SAT•CABLE
CD T APE
6 CH.IN
THEATER AV SURROUND RECEIVER RT2280
Example 1:
If you connect a DVD player to the DVD input
(audio + video) on the receiver and press the DVD
button, you will be able to have the sound and
image transmitted by the DVD.
6 CH.IN
te Amplifier
HOME THEATER AV SURROUND RECEIVER RT2280
Example 2:
Based on the example 1, the DVD is playing , if a
VCR is connected to the VCR 1 input (audio +
video) of the receiver and the VCR1 button is
pressed, image and sound from the VCR source will
replace the DVD.
6 CH.IN
ER AV SURROUND RECEIVER RT2280
EN
VCR ON OFF TV
1
DVD•6 CH VCR AM•FM SAT•CABLE
2
CD T APE
TV
VCR 1 ON OFF
DVD•6 CH VCR AM•FM SAT•CABLE
2
CD T APE
VCR ON OFF TV
1
VCR AM•FM SAT•CABLE
DVD•6 CH 2
CD T APE
13