Genie GTH-636 Service And Repair Manual page 43

April 2018
HYDRAULIC TANK
Note: The fuel tank must be removed before
removing the hydraulic tank.
9 Remove the access cover to the hydraulic
tank.
10 Remove the filler cap from the hydraulic tank.
11 Place a drain pan or other suitable container
under the hydraulic tank. Refer Specifications,
Machine Specifications.
12 Remove the drain plug from the hydraulic tank
and completely drain the tank.
Bodily injury hazard. Beware of
hot oil. Contact with hot oil may
cause severe burns.
13 Tag, disconnect and plug the supply and
return hoses from the hydraulic tank. Cap the
fittings.
14 Support and secure the tank assembly to an
appropriate lifting device.
15 Remove the fasteners securing the tank
assembly to the chassis. Remove the tank
from the machine.
Crushing hazard. The tank
assembly could become
unbalanced and fall if not properly
supported when removed from
the machine.
Part No. 1287209GT
Fuel and Hydraulic Tanks
GTH-636
Service and Repair Manual
33