Samsung DV5471AEW/XAA Service Manual page 25

Part
Drum Back Removal
复件 Hudson_Dryer_SM_E.indb 23
figure
1. Disconnect the Power Supply to the unit.
2. Remove the Panel Control, the Main PCB, the Top.
Cover, the Frame Front, the Drum Front and the
Drum.
3. Remove 7 screws from the Drum Back.
4. Separate the wire in the Wire Holder.
5. Separate the Drum Back from the Frame.
6. Remove 4 screws from the Air Duct.
Be careful of the Bracket edge.
Description
Disassembly and Reassembly _ 9
2012-4-2 15:20:55