Samsung DV5471AEW/XAA Service Manual page 14

Part
DOOR REVERSAL
(Continued)
10 _ Disassembly and Reassembly
复件 Hudson_Dryer_SM_E.indb 12
figure
1. Unplug the power cord.
2. Remove the four hinge screws from the door.
3. Remove the door by lifting it.
4. Remove the two screws from the holder-lever, and
then remove the cover-holder.
5. Assemble the holder-lever on the opposite side
using the screws that were removed from the
holder-lever-in Step 4.
6. Assemble the cover-holder on the opposite side.
7. Remove the two cover-hinges.
8. Assemble the two cover-hinges on the opposite
side.
Use a flat head screwdriver(-) to remove the
9. Remove the 14 screws.
2 screw (L) are longer than the other screws.
Description
cover-holder's cover-hinge.
2012-4-2 15:20:50