Samsung DV5471AEW/XAA Service Manual page 13

Part
Main PCB Removal
Top Cover Removal
复件 Hudson_Dryer_SM_E.indb 11
figure
1. Remove the Panel Control.
2. Separate 4 Hook From the Guide PCB.
3. Remove the Housings.
4. Remove 1 Screw from the Top Cover.
1. Disconnect the power supply to the unit.
2. Remove the Panel Control and the Main PCB.
3. Remove the Cap-Cover Top and 2 screws from the
Bracket Cover Top.
4. Slide the Top Cover towards the front and lift from
the unit.
Scratch and impact to the top cover is
Description
prohibited.
Disassembly and Reassembly _ 9
2012-4-2 15:20:50