Table of Contents
Advertisement
Part
frame front
Removal
10 _ Disassembly and Reassembly
复件 Hudson_Dryer_SM_E.indb 14
figure
1. Disconnect the power supply to the unit.
2. Remove the Panel Control, the Main PCB and the
Cover Top.
3. Remove 3 screws from the Frame Front.
When 1 screws of the top portion work because
5. Remove 3 screws.
6. Remove the Door Switch Housing.
When reassemble Door Switch to Frame Front,
7. Lift the Frame Front off the three tabs across the
bottom and remove.
Description
was added newly, keep in mind.
be careful for insert direction.
2012-4-2 15:20:50
Hide quick links:
Advertisement
Table of Contents
