Part
Heater Removal
复件 Hudson_Dryer_SM_E.indb 19
figure
1. Disconnect the power supply to the unit.
2. Remove the Panel Control, the Main PCB, the
Cover Top, the Frame Front, the Drum Front and
the Drum.
3. Removal 6 Housing Heater-Terminals.
4. Remove 1 screw from the Heater.
5. Separate the Heater from the Drum-back.
6. Remove 4 screws from the Thermostats.
Do not apply excessive force to the terminal.
Description
Disassembly and Reassembly _ 9
2012-4-2 15:20:53