Changing The Channel - RCA Scenium L50000 User Manual

ON•OFF
DIRECTV TV
VCR
DVD
1
VCR
AUX
2
AUD
M1 M3
M2
Subchannel
Highlighted to
entry box indicate TV mode
Primary channel
entry box
DIRECTV
ON•OFF
DIRECTV TV
button
VCR
DVD
1
VCR
AUX
2 AUD
M1 M3
M2
Channel entry box Highlighted to indicate
DIRECTV mode

Changing the channel

To change channels by entering numbers with the remote control, the remote needs to be in the
TV
correct "mode" either DIRECTV mode (if you subscribe to DIRECTV
button
mode.
When you want to watch a digital or analog TV channel, put the remote in TV
mode
If you want to watch a digital channel:
1. Press TV on the remote (to put it in TV mode).
2. Enter the primary channel number (this number appears in the primary channel entry box).
If there isn't a subchannel, press OK.
3. If the primary channel number has fewer than three digits and you want to enter
subchannel numbers, press the right arrow button to move to the subchannel entry box.
4. Enter the subchannel number (the number appears in the subchannel entry box).
5. Press OK on the remote control to tune to the channel.
If you want to watch an analog channel:
1. Press TV on the remote control (to put it in TV mode).
2. Enter the channel number (the number appears in the primary channel entry box).
Note: analog channels don't have subchannels.
3. Press OK on the remote control to tune to the channel.
When you want to watch DIRECTV
DIRECTV mode
1. Press DIRECTV on the remote (to put it in DIRECTV mode).
2. Enter the channel number and press OK. If you don't enter at least three digits,
"???" appears in the channel entry box, and the system will wait for a valid entry.
Chapter 4
Chapter 4
® programming, put the remote in
Basic Operation
Basic Operation
® programming) or TV
73