RCA Scenium L50000 User Manual page 43

LEVEL – and LEVEL + Used to make adjustments to delay time, center speaker
output level, rear speaker output level, front speaker output level, or subwoofer
output level if your audio receiver supports this function. You must press the AUD
button first to put the remote in audio mode.
M1, M2, M3 Use these buttons to store macros (shortcuts) that you set up in order
to alleviate having to press many buttons. For details, go to page 53.
MENU Brings up the main menu.
MUTE Reduces the TV's volume to its minimum level. Press again to restore
volume.
OK When a menu is on the screen, press OK to select the item that is highlighted.
ON•OFF When the remote control is in TV or DIRECTV mode, ON•OFF turns
the TV on or off. If the remote is in another component mode (VCR, DVD, etc.)
and the component button is programmed, the remote will turn the component on
and off.
PAUSE When you're operating another component (like a VCR or DVD Player),
press PAUSE to pause playback.
PIP (Picture-In-Picture) Makes the PIP window appear and disappear.
PLAY When you're operating another component (such as a VCR or DVD Player),
press PLAY to start playing the videotape or disc.
PROGRAM Programs audio preset channels (you must press the AUD button first
to put the remote in audio mode).
REAR Used with the LEVEL + and LEVEL – button to adjust the level of the rear
speakers of your audio system if you've connected one to your TV (you must press
the AUD button first to put the remote in audio mode).
REC If the remote is in VCR mode, press REC to record programming.
REV If you're operating another component (such as a VCR or DVD Player), press
REVERSE to go backwards on a disc or videotape.
SKIP Press once before changing channels and the TV will return to the original
channel after 30 seconds. Press repeatedly to add more time.
Chapter 3
Chapter 3
The Remote Control
The Remote Control
TIP: MENU button
When using an RCA, GE, or Proscan VCR and in VCR
mode, the MENU button functions as a PROGRAM
button.
Tip: ON•OFF button
When pressed twice within two seconds, all
components that are on will be turned off (this
feature only works with most RCA, GE, and Proscan
products).
Tip: SKIP button
To cancel commercial skip, press CLEAR.
39