RCA Scenium L50000 User Manual page 42

Chapter 3
Chapter 3
ON•OFF
DIRECTV
VCR
1
VCR
AUX
2
AUD
M1
M2
L1
L2
MUTE
CH +
VOL - VOL +
REAR
CH -
FORMAT
TEST
GUIDE
LEVEL - OK
MENU
PROGRAM
1 2
4 5
7 8
INPUT 0
FUNCTION
REV PLAY
REC STOP
CH
SWAP
CTRL
PIP
DELAY
DSP
ON•OFF
38
The Remote Control
The Remote Control
FRONT Used with the LEVEL + and LEVEL – button to adjust the level of the front
speakers of your audio system if you've connected one to your TV (you must press
the AUD button first to put the remote in audio mode).
FUNCTION For RCA audio products, toggles between stereo and mono.
TV
FWD If you're operating a VCR, DVD Player, CD Player, or a tape player with the
DVD
remote control, press this button to advance the videotape, audio tape, or disc.
M3 GO BACK Moves you back and forth between the last two channels selected in
either DIRECTV mode or TV mode. For example, if you have been viewing both
L3
®
DIRECTV and TV channels (and thus using both the DIRECTV and TV modes),
FRONT
pressing GO BACK while watching a DIRECTV
SKIP
®
DIRECTV channel you viewed. Pressing it while watching a TV channel moves you
to the last TV channel you viewed.
CENTER
GO In the menu system, press GO BACK to return to the previous menu screen.
BACK
AM•FM
GUIDE When in TV mode, makes the TV program guide appear. In DIRECTV
INFO
mode, makes the DIRECTV
LEVEL + GUIDE button scroll through the different types of guides.
CLEAR
3
6
INFO Gives you more information about the channel and program
9
by making the channel banner appear. Quickly press again when the
channel banner is on the screen (an extended channel banner
ANT
appears). To remove the banner, press INFO a third time.
FWD
INPUT Toggles through the TV's available external input sources
PAUSE
(video input channels).
WHO
L1, L2, L3 (Learning 1, 2, 3) Use these buttons to supplement the
DSP
MODE
codes that are already programmed into your remote control. Go to
page 50 to find out more about these learning buttons and how they
work.
®
channel moves you back to the last
®
programming guide appear. Subsequent presses of the
TIP: GUIDE button
Press INPUT and then press GUIDE
to get a guide-like list of
available video input channels.
TIP: INFO button
Press INFO when in the program
guides to get more information
on the highlighted program or
channel.